Supported Windows versions: Windows Vista / Windows XP / 2000
Use these setting when communicating Ethernet/IP to Allen-Bradley SLC 5/03, 5/04, 5/05 and MicroLogix 1000/1100/1200/1500 controllers via 1761-NET ENI Series A or Series B Ethernet to DF1 bridge module.
· Select the Adapter
· Enabled = UNCHECKED
· Device Type = Ethernet
· PLC Type = SLC/MicroLogix (1761 NET ENI)
· Click Apply
· Click Done
Notes:
All other driver settings are not used for this configuration.
Addressing individual nodes on the Ethernet network is done via INGEAR PLC ActiveX control properties