ControlLogix Gateway to SLC 5/04 via DH+

Supported Windows versions: Windows Vista / Windows XP / 2000

Use these setting when communicating Ethernet to Allen-Bradley SLC 5/04 controllers over Data Highway Plus via ControlLogix Gateway.

·      Select the Adapter

·      Enabled = UNCHECKED

·      Device Type = Ethernet

·      PLC Type = SLC5/04 (ControlLogix Gateway DH+)

·      Click Apply

·      Click Done

Notes:

All other driver settings are not used for this configuration.

Addressing individual nodes on the Ethernet network is done via the INGEAR PLC ActiveX control properties