Supported Windows versions: Windows Vista / Windows XP / 2000
Use these setting when using the Allen-Bradley 1784-PCMK PCMCIA card to communicate Data Highway Plus to PLC-5 controllers, SLC 5/04 controllers.
· Select the Adapter
· Enabled = CHECKED
· Device Type = 1784-PCMK
· Enter the Base Address
1784 PCMK Vista / Win XP / 2000 Setup
· PLC Type
PLC5 (ENET/DH+/DF1) - when communicating to Allen-Bradley PLC-5 Style Processors
SLC 5/04 (DH+) - when communicating to Allen-Bradley SLC 5/04 Processors.
· Link Speed = 57.6K, 115.2K, or 230K
LinkSpeed must match the baud rate of the DataHighway Plus network.
· TimeOut (3000ms) default. This is how long the INGEAR driver will wait for a response after sending a message on the DataHighway Plus network.
· Station ID – This is the DataHighway Plus network node number you are assigning to the 1784-PCMK card.
The Station ID must be a unique number on the DataHighway Plus network.
· Term Name (Optional) – This is a 7 character user defined string to identify the 1784-PCMK card to other nodes on the DataHighway Plus network.
· Click Apply
· Click Done
Notes:
All other driver settings are not used for this configuration.
Addressing individual nodes on the DataHighway Plus network is done via INGEAR PLC ActiveX control properties