|
Message |
Cause |
Solution |
|
OLE Initialization Failed |
The OLE libraries failed to initialize |
Contact Product Support |
|
Windows sockets initialization failed |
WINSOCK libraries failed to initialize. |
Install Windows TCP/IP networking on your system |
|
Could not run … |
The server did not recognize the command line parameter |
REGSERVER and UNREGSERVER are the only 2 command line parameters available. |
|
No drivers have been installed |
A warning is being provided indicating that there are no drivers available for devices |
Add one or more drivers |
|
Please Enter a Driver Name |
A name was not assigned to a driver |
Assign a unique name to the driver |
|
DriverName is already using COMn: |
DriveName has already been assigned this COM Port |
Select an alternate COM Port |
|
DriverName is already using Address IP Address |
DriverName has already been assigned this IP Address |
Select an alternate IP Address |
|
DriverName is already using Base Address BaseAddress |
DriverName has already been assigned this BaseAddress |
Select an alternate Base Address |
|
Administrator rights are required to create registry settings for DriverName |
The current user does not have sufficient privileges to change the driver settings |
A user with Administrator privileges is required to change these settings |
|
DriverName is already using I/O Port PortNum |
DriverName has already been assigned this I/O Port |
Select an alternate I/O Port |
|
Cannot change driver configuration while server is running or connected to clients |
An attempt was made to change a driver configuration while the server had clients connected |
Stop all client applications before changing driver configuration |
|
Invalid character(s) in Driver Name |
The Driver Name contains one or more invalid characters |
Rename the driver using characters "A-Z", "0-9" and underscore "_" |
|
Please enter an IP Address or computer name |
An IP Address or Computer Name was not provided for an Ethernet drivers |
Provide a valid IP Address or Computer Name. |
|
Select a Baud Rate |
A Baud Rate has not been assigned to the current driver |
Assign a baud rate |
|
Select a Station ID |
A Station ID has not been assigned to the current driver |
Assign a Station ID |
|
Select a driver for this device |
A driver has not been associated to a newly created device |
Select a Driver in Device Properties |
|
Group’s Name already exists |
The Group Name is already in use under device |
Provide a unique GroupName |
|
Group’s Name cannot accept Dots |
A Group Name contained one or more Dots "." |
Remove the Dots from the Group Name |
|
Tag Name already exists |
The Tag Name is already in use under Device/Group |
Provide a unique Tag name |
|
Tag Name cannot accept Dots |
A Tag Name contained one or more Dots "." |
Remove the Dots from the Tag Name |
|
Cannot Scale VT_BOOL or VT_BSTR data types |
Scaling for VT_BOOL and VT_BSTR is not supported | |
|
Unable to Open File |
The selected tag database failed is not valid. The file/disk may be corrupt or damaged |
Select a valid tag database |
|
IMPORT FAILED, No Device or Group Available. |
No Device or Groups were found in the CSV File. The file may be corrupt or damaged |
Export a CSV file containing appropriate Device/Groups |
|
Bad lines encountered. |
The CSV file contained invalid information. The file may be corrupt or damaged |
Export a CSV file containing appropriate information |
|
File exception while reading. |
An error occurred while reading the file from disk. The file/disk may be corrupt or damaged. |
Select and alternate file, or use a backup copy. |
|
Unable to create file. |
An error occurred while creating the file to disk. The disk may be full, corrupt or damaged |
Select and alternate disk to save the file to. |
|
File exception while writing |
An error occurred while writing the file to disk. The disk may be full, corrupt or damaged |
Select and alternate disk to save the file to. |