EXT/STS Error Codes indicates the Allen-Bradley PLC cannot peform the command or function.
|
.ErrorCode |
.ErrorString |
|
1 |
STS Error 0x01 - DST node is out of buffer space |
|
2 |
STS Error 0x02 - Cannot guarantee delivery: link layer (The remote node specified does not ACK command.) |
|
3 |
STS Error 0x03 - Duplicate token holder detected |
|
4 |
STS Error 0x04 - Local port is disconnected |
|
5 |
STS Error 0x05 - Application layer timed out waiting for a response |
|
6 |
STS Error 0x06 - Duplicate node detected |
|
7 |
STS Error 0x07 - Station is offline |
|
8 |
STS Error 0x08 - Hardware fault |
|
16 |
STS Error 0x10 - Illegal command or format |
|
32 |
STS Error 0x20 - Host has a problem and will not communicate |
|
48 |
STS Error 0x30 - Remote node host is missing, disconnected, or shut down |
|
64 |
STS Error 0x40 - Host could not complete function due to hardware fault |
|
80 |
STS Error 0x50 - Addressing problem or memory protect rungs |
|
96 |
STS Error 0x60 - Function not allowed due to command protection selection |
|
112 |
STS Error 0x70 - Processor is in Program mode |
|
128 |
STS Error 0x80 - Compatibility mode file missing or communication zone problem |
|
144 |
STS Error 0x90 - Remote node cannot buffer command |
|
160 |
STS Error 0xA0 - Wait ACK (1775KA buffer full) |
|
176 |
STS Error 0xB0 - Remote node problem due to download |
|
192 |
STS Error 0xC0 - Wait ACK (1775KA buffer full) |
|
208 |
STS Error 0xD0 - Unknown (not used) |
|
224 |
STS Error 0xE0 - Unknown (not used) |
|
61441 |
EXT/STS Error 0xF001 - A field has an illegal value |
|
61442 |
EXT/STS Error 0xF002 - Less levels specified in address than minimum for any address |
|
61443 |
EXT/STS Error 0xF003 - More levels specified in address than system supports |
|
61444 |
EXT/STS Error 0xF004 - Symbol not found |
|
61445 |
EXT/STS Error 0xF005 - Symbol is of improper format |
|
61446 |
EXT/STS Error 0xF006 - Address doesn't point to something usable |
|
61447 |
EXT/STS Error 0xF007 - File is wrong size |
|
61448 |
EXT/STS Error 0xF008 - Cannot complete request, situation has changed since the start of the command |
|
61449 |
EXT/STS Error 0xF009 - Data or file is too large |
|
61450 |
EXT/STS Error 0xF00A - Transaction size plus word address is too large |
|
61451 |
EXT/STS Error 0xF00B - Access denied, improper privilege |
|
61452 |
EXT/STS Error 0xF00C - Condition cannot be generated (resource is not available) |
|
61453 |
EXT/STS Error 0xF00D - Condition already exists (resource is already available) |
|
61454 |
EXT/STS Error 0xF00E - Command cannot be executed |
|
61455 |
EXT/STS Error 0xF00F - Histogram overflow |
|
61456 |
EXT/STS Error 0xF010 - No Access |
|
61457 |
EXT/STS Error 0xF011 - Illegal data type |
|
61458 |
EXT/STS Error 0xF012 - Invalid parameter or invalid data |
|
61459 |
EXT/STS Error 0xF013 - Address reference exists to deleted area |
|
61460 |
EXT/STS Error 0xF014 - Command execution failure for unknown reason |
|
61461 |
EXT/STS Error 0xF015 - Data conversion error |
|
61462 |
EXT/STS Error 0xF016 - Scanner not able to communicate with 1771 rack adapter |
|
61463 |
EXT/STS Error 0xF017 - Type mismatch |
|
61464 |
EXT/STS Error 0xF018 - 1771 module response was not valid |
|
61465 |
EXT/STS Error 0xF019 - Duplicated label |
|
61466 |
EXT/STS Error 0xF01A - File is open; another node owns it |
|
61467 |
EXT/STS Error 0xF01B - Another node is the program owner |
|
61468 |
EXT/STS Error 0xF01C - - Reserved |
|
61469 |
EXT/STS Error 0xF01D - - Reserved |
|
61470 |
EXT/STS Error 0xF01E - Data table element protection violation |
|
61471 |
EXT/STS Error 0xF01F - Temporary internal problem |
|
61474 |
EXT/STS Error 0xF022 - Remote rack fault |
|
61475 |
EXT/STS Error 0xF023 - DH+ remote pass through timeout |
|
61476 |
EXT/STS Error 0xF024 - Unknown error |