Also See: Hot Switch Drivers
Hot Switch PLC Nodes
PLC Node Hot Switch is available on both SoloLink and Full Version servers.
Step 1 – Create a Device
Create a device that references the PLC Node or CPU Slot/CIP Route in the Device Properties dialog box
PLC Node
CPU Slot / CIP Route
See: Configuring Server Devices
The System Tag _Attributes._Node tag will show the current PLC Node, or CIP Slot/Route Path
Step 2 – Client Changes _Attributes.Node
The OPC Client writes a new PLC Node or CIP Slot/Route Path to the _Attributes.Node tag.
The server will respond by directing communications to the updated PLC Node / CIP Route Path.