Configuring Serial DF1 Driver

$images\img00731.gif$

Select Serial DF1 (Full-Duplex) to PLC-5/SLC/MicroLogix/ControlLogix, then click the Add… button

$images\img00732.gif$

Driver Configuration Dialog Box

$images\img00733.gif$

Assign a Driver Name

In the Driver Name section enter a unique name for this driver.

$images\img00734.gif$

Driver Settings

$images\img00735.gif$	Port Select the COM Port to use (COM1: ~ COM24:)
	Baud Rate Select the baud rate setting that matches the PLC serial port baud rate
	Parity Select the parity setting that matches the PLC serial port parity
	Flow Use the default setting (None)
	Data Bits Select the data bit setting that matches the PLC serial port data bits
	Stop Bits Select the stop bit setting that matches the PLC serial port stop bits
	CheckSum Select the Checksum setting that matches the PLC serial port check sum

Click the OK button.

$images\img00736.gif$