MicroLogix 1100 Ethernet

NOTE: Use the below setting for MICROLOGIX 1100 FRN 3.0 or EARLIER

$images\img00872.gif$

To configure an Ethernet Driver for a MicroLogix 1100 device.

Select AB 1756 (Ethernet ControlLogix/CompactLogix/MicroLogix 1100) from the Supported Drivers section and click the Add… button

$images\img00873.gif$

Ethernet Driver Settings

$images\img00874.gif$	Driver Name: Enter a name for this driver. This name must be unique. Also See: Hot Switch Drivers
	PLC IP Address or Hostname Enter the IP Address of the Ethernet Module, or a Hostname as it appears in the HOSTS file of your computer.
	Connect Timeout (ms) Enter a connect timeout value for driver (in milliseconds) the default is 50 ms. Also See: System Tags
	Click the OK button to create the driver $images\img00875.gif$