Also See: Configuring SST Driver
Configure SD Card Manager
Install the SST 5136 SD Driver from the distribution CD that accompanied the SST Card.
When the installation is complete, configure the SST driver settings
Click Start -> Programs -> SST -> AB -> SD Card Manager.
SST SD Card Settings
Select the Card from the list.
Set PCI Card As
Select SD Card
Application Settings
Uncheck WW DDE Server
Uncheck KT Emulation
All other settings are disabled
Module Settings
Check Automatically load Card on Start Up
Select Data Highway Plus from the list
PCI Force Address Settings
Uncheck Force address range
Memory is disabled
IO is disabled
SST/Third Party Device Driver
Select Using SST Driver Driver (Start ssTechDrvr)
Click the OK button
