Configuring 1784-KTX Driver

Also See: Supported DH+ Cards , Supported DH-485

1784-KTX(Single Channel) Cards – A driver is required for each 1784-KTX card installed.

1784-KTXD(Dual Channel) Cards – 2 drivers are required for each 1784-KTXD card installed. One driver is required to configure Channel A, and the other driver is required to configure Channel B.

$images\img00700.gif$

Select DH+/DH-485 (1784-PKTX, KTX, KT, PCMK) and click the Add.. button.

$images\img00701.gif$

Driver Configuration Dialog Box

$images\img00702.gif$

Setting the Card Type

In the 1784-Card Type section select KTx(D)

$images\img00703.gif$

Assigning a Driver Name

In the Driver Name section assign a unique name to KTX driver. The Find Cards icon is disabled

$images\img00704.gif$

Setting the Network Type

In the Allen-Bradley Network Type, select the type of network you are interfacing to.

$images\img00705.gif$

Also See: Hot Switch Drivers

Setting Card Properties

In the Card Properties section

$images\img00706.gif$	Base Address: Select the Base Address from the pull-down list that corresponds to the base address settings on the KTX card selector switch’s.
	Station ID: Select a unique station ID (Node Address) for the PKTX Card. DH+ Networks (00-77) DH-485 Networks (00-31)
	Baud Rate: Select the baud rate that matches the network. DH+ Networks (57.6K, 115K, 230K) DH-485 Networks (9600, 19.2K)
	Max Node Addr: (DH-485 Only) Select the highest node on the DH-485 network to optimize network token passing
	Terminal Name (Optional) Enter a 7 character node name for the KTX card for network identification.

Click the OK button.

$images\img00707.gif$