Configuring 1784-KT Driver

Also See: Supported DH+ Cards , Supported DH-485

1784-KTX(Single Channel) Cards – A driver is required for each 1784-KTX card installed.

1784-KTXD(Dual Channel) Cards – 2 drivers are required for each 1784-KTXD card installed. One driver is required to configure Channel A, and the other driver is required to configure Channel B.

$images\img00708.gif$

Select DH+/DH-485 (1784-PKTX, KTX, KT, PCMK) and click the Add.. button.

$images\img00709.gif$

Driver Configuration Dialog Box

$images\img00710.gif$

Setting the Card Type

In the 1784 Card Type section select KT

$images\img00711.gif$

Assign a Driver Name

In the Driver Name section enter a unique name for the driver. The Find Cards icon is disabled

$images\img00712.gif$

Also See: Hot Switch Drivers

Setting Network Type

The only select supported is DH+

$images\img00713.gif$

Setting Card Properties

In the Card Properties section

$images\img00714.gif$	Base Address: Select the Base Address from the pull-down list that corresponds to the base address settings on the KT card DIP Switch settings
	Station ID: Select a unique station ID (Node Address) for the KT Card. DH+ Networks (00-77)
	Baud Rate: Select the baud rate that matches the network. DH+ Networks (57.6K)
	Terminal Name (Optional) Enter a 7 character node name for the KT card for network identification.

Click the OK button.

$images\img00715.gif$